At current I am once more with an Ikea hack . I will current you ways one can rework Ivar cabinets in just a few minutes. As you might need seen, we’re talking regarding the metallic cabinets in white. Ivar cabinets are moreover constituted of secure picket, we even have one at dwelling, nonetheless in the mean time it’s all regarding the whites constituted of metallic, which moreover present quite a few space for storing.
What you need:
- Shelf 80 x 30 x 1.9 cm
- Double sided tape
That’s how the DIY IKEA Ivar Hack problem works:
Lay the shelf down so that the underside seems up. Decrease two 30 cm strips from the tape roll. You stick the first strip of tape on the short side of the board and the second strip on the alternative side. Try to use the tapes as close to the periphery as attainable. Peel off the protective tape on the tape after which place the board on prime of the Ivar cabinet. Assure that the perimeters are flush. Press briefly and that’s about it.
If you take a greater check out my boards, you’ll discover that they are barely gray. And that was exactly the reason why I chosen them. Our new floor moreover has a gray undertone, which is why the cupboards match fully proper right here.
In spite of everything, you establish which picket coloration best suits you / your non-public house. The thickness of the board may also be not decisive. I would merely make it attainable for the color of the picket contrasts with the white cabinets.
I am larger than glad with the consequence. The Ivar cabinets now look just a bit further elegant. The ground not seems so bare. Metal often has the disadvantage that it might probably look cool. And I personally uncover it more durable to brighten on surfaces product of sunshine metal. Wood is and stays my favorite supplies.
It was very straightforward to pry up the cupboards and this IKEA Hack problem didn’t really worth some large money. So a very worthwhile DIY problem. And as always, I hope you liked this DIY thought too.
See you shortly,